Maintaining Your Diving Drysuit: Tips for Prolonging the Life of Your Suit

A diving drysuit is an essential piece of equipment for cold-water diving. A dry suit keeps you warm and dry in cold water conditions, which makes it easier to enjoy the underwater environment. To get the most out of your diving drysuit, it is important to take care of it properly.

  1. Rinse Your Diving Drysuit After Each Dive:

After each dive, it is important to rinse your drysuits australia thoroughly with fresh water. This helps to remove any salt or sand that may have accumulated on the suit during the dive. Make sure to rinse the inside and outside of the suit, paying special attention to the zippers and seals.

  • Dry Your Diving Drysuit Properly:

Drying your diving drysuit properly is crucial to prevent mold and mildew from growing on the suit. Hang the suit up in a well-ventilated area, away from direct sunlight or heat sources. Make sure the suit is completely dry before storing it.

  • Store Your Diving Drysuit Correctly:

Storing your diving drysuit correctly is important to prevent damage to the suit. Store the suit in a cool, dry place away from direct sunlight or heat sources. Do not fold the suit, as this can cause creases that may damage the suit over time. Instead, hang the suit up on a hanger or lay it flat in a storage container.

  • Inspect Your Diving Drysuit Before Each Dive:

Before each dive, it is important to inspect your diving drysuit for any signs of damage or wear. Check the zippers, seals, and stitching for any signs of wear or tear. If you notice any damage, get it repaired before using the suit again.

  • Lubricate the Zippers:

The zippers on your diving drysuit can become stiff and difficult to use over time. To keep the zippers working smoothly, apply a lubricant to them regularly. This will make it easier to put the suit on and take it off, and will also help to prolong the life of the zippers.

  • Don and Doff Your Diving Drysuit Carefully:

Putting on and taking off you’re diving drysuit can be challenging, but it is important to do it carefully to prevent damage to the suit. Use a lubricant on the seals to make them easier to slide on and off. Avoid pulling or tugging on the suit, as this can damage the seals and zippers.

  • Clean and Maintain the Seals:

The seals on your diving drysuit are an important part of keeping you dry and warm. Over time, the seals can become stiff and cracked, which can reduce their effectiveness. Clean the seals regularly with mild soap and water, and use a seal conditioner to keep them supple and flexible.


Maintaining your diving drysuit properly is essential to prolong its life and ensure that it continues to perform well. Rinsing the suit after each dive, drying it properly, storing it correctly, inspecting it before each dive, lubricating the zippers, donning and doffing it carefully, and cleaning and maintaining the seals are all essential maintenance tasks for a diving drysuit. By following these tips, you can help to ensure that your drysuit lasts for many years and provides you with a comfortable and enjoyable diving experience.